Kanger Kbox Mod 40W
The K BOX is Kangertech’s first box mod which makes good use of its aluminium chassis to make the device as light as possible while still delivering a strong power output. Despite its lightness, the Kanger KBOX is a very durable device which also fits comfortably in the palm of the hand.
The wattage setting allows the user to choose between seven variables between 8W and 40W for atomizers with 0.4ohms or above. The protective features found in the KBOX include a heat dissipation vent as well as short circuit and current overload protection as well reverse battery protection. The connector thread is an industry standard 510, making the Kanger KBOX compatible with most clearomizer tank systems. The device has a cell capacity indicator on the side alongside the wattage/power indicator which is operated with a simple button. Also included is a standard box mod feature of over-use protection, with the device flashing three times and temporarily disabling if the activation button is held for longer than ten seconds.
- Dimensions: 3-1/2″ x 1-5/8″ x 3/4″ to 1″
- 510 Threaded
- Minimum resistance: 0.4 Ohm
- Adjustable wattage settings (8W, 13W, 20W, 25W, 30W, 35W or 40W)
- On/off – press the power button 5 times within 3 seconds to turn the device on or off
- Low voltage protection
- Low resistance protection – If the coil is less than 0.4ohm, the power light will flash 3 times and disable any output
- Short circuit protection – If a Short is detected, the power light will flash 3 times and disable any output
- Reverse battery protection
- Low battery warning
- 10 second cut off safety feature – If the power button is held for more than 10 seconds, the power light will flash 3 times and disable any output
- Twist-off tail cap
- Utilizes one high amp 18650 battery